![]() ![]() DSP-APP 1.4 improves the performance of initial digital voice decoding and Increased instances of the scanner failing to decode the beginning of digital transmissions onĬertain systems. To find the DSP/Firmware updates, ask on the RadioReference Radio Shack ForumĭSP APP Firmware Version U1.4 provides the following enhancement to your PRO-96/2096 Digital Trunking Scanner:Īfter upgrading to DSP Application firmware version 1.3 (DSP-APP 1.3), some users reported When the initialization is complete, M000 appears on the top of the display. The scanner displays:ĭo Not Turn Off the scanner until the initialization is complete. Press "0" (zero) while on the WELCOME screen. The scanner briefly displays the DSP boot version, then the WELCOME screen.Ģ. Turn off the scanner, then turn it on again. NOTE: This procedure has no effect on the DSP versionġ.How Do I Reset the PRO-96/2096 Back to Factory Defaults? See the PRO-2096 Listening Issues Thread for the PRO-2096.See the PRO-96 Internal Adjustments article for the PRO-96 fix.Is there a fix, short of a better antenna / coax? My unit seems to have problems decoding a 800 Mhz P25 issue / is insensitive.This is a common issue with the ribbon connector wiggling loose.My display went blank (or hard to read even with backlight on).Yes, using custom tables applied via software.Will the PRO-96/2096 survive the Rebanding process?.For the 2096, see our Programming Shortcut pro-2096 article. For the PRO-96, see our Programming Shortcut Pro-96 article.How do I program this scanner manually?.Such systems cannot be received by these scanners. These systems are identified by Project 25 Phase II in the System Type in the database.Will the PRO-96/2096 decode the new Phase II systems coming online?.It is possible, however, to gather information on these systems only if they are running a control channel at 9600 baud using the Pro96Com utility. ![]() You may be able to hear audio if it's not encrypted, but systems in this band cannot be trunktracked with these scanners.
0 Comments
Leave a Reply. |